Control

Basic Features


  1. CCT control
    1. Turn the analog CCT dial to the desired color temperature:
      CCT Dial
    1. Color temperatures are shown divided by 100 (2000K/100 = 20, 3000K/100 = 30, etc) for legibility and precision marking on the dial
  1. Dimming
    1. The Q-LED crossfade lamps are capable of dimming down while maintaining color temperature.
    2. The Q-LED crossfade lamps are dimmed by an external TRIAC AC source.
    3. To Dim Q-LED crossfade lamps, plug the installed P1G into:
      1. AC power wired up to a wall-dimmer switch
      2. AC power wired up to a TRIAC dimmer source
  • AC power connected to a stand-a-lone TRIAC dimmer plugged into AC-power
  1. Dimming Equipment recommendations
    1. NOTICE The crossfade lamps must be dimmed with TRIAC AC dimming circuits. VARIAC type dimmers will not work.
    2. Reverse-phase (trailing edge) TRIAC AC dimming circuits will enable lower dim levels with less potential strobing issues.
    3. CFL/LED TRIAC AC dimming circuits must have a circuit that enables stable low voltage operation.
    4. The following dimmers work well with crossfade products:
      1. Lutron CF line of household dimmers
      2. ETC Sensor
  • RatPac dimmer products

 

 

Technical Specifications

  1. Physical Length, Width Height
    1. Q15W2060XG, Q25W2060XG, Q50W2060XG, Q75W2060XG, and Q100W2060XG: Width & height = 1.5” 3.81 cm
    2. Q15W2060XG: 1’ / 30.5cm pin tip to pin tip
    3. Q25W2060XG: 2’ / 61cm pin tip to pin tip
    4. Q50W2060XG: 4’ / 122cm pin tip to pin tip
    5. Q75W2060XG: 6’ / 183cm pin tip to pin tip
    6. Q100W2060XG: 8’ / 244cm pin tip to pin tip
  2. Diffusor Length, Width Height
    1. Width = 1.5” 3.81 cm
    2. Height = 0.75” 1.91 cm
    3. Q15W2060XG length: 9 3/16” / 23.3cm
    4. Q25W2060XG length: 20 5/8” / 52.4cm
    5. Q50W2060XG length: 44 5/8” / 113cm
    6. Q75W2060XG length: 68 5/16’ / 174cm
    7. Q100W2060XG length: 92’ / 234cm
  3. Illuminant technical data
    1. Diode set 1: 2000K, duv = 0.0055 (2/3 to ¾ Minus Green correction required for neutral CCT)
    2. Intermediary CCT: 3000K, duv = -0.007 (1/4 Plus Green correction required for neutral CCT)
    3. Diode set 2: 6000K, duv = 0.003