Q-Lion Update Instructions

Using the Q-Lion Update Cable, update your light from V2 software to V3

Q-Lion Update Instructions

 

  1. Please download the Update Utility at QuasarScience.com/support 

  2. Plug in your Q-Lion Update Cable.

  3. Run the Utility. Make sure you are in Q-Lion Mode. If you are in Linear Lamp Update Utility, click here to endure you are in Q-lion Update Utility.Update Step 3
  4. Press the "Check Version" button
    Update Step 4
  5. Press "Download"
      Update Step 5
  6. Press "Next" at the bottom.
    Update Step 6
  7. Choose your Q-Lion Model
    Update Step 7
  8. Press "Update"
    Update Step 8
  9. After updating the lamp, Press Restart to update the same model lamp.
    Update Step 9
  10. To Change models, click "Back"
    Update Step 10

During Q-Lion Update, I get the error "Device Update failed"
Solutions:
Please check the log file and see if you are getting the following error:

(ST): (API) ERROR : Cannot communicate with the tool.
Wrong tool selection or check tool power supply or check that a previous session is closed, "


If so, please try the following:

Ensure that you have a 2nd Generation lamp that has the RST and KILL Buttons. (The update is for these versions only)

Be sure you are using the Q-Lion Update Cable provided by Quasar Science

If you confirm the top 2 points, please download and run the Driver files here. Click Here to Download.