Manual
1. Manual Mode with On Screen Controls
Wireless
2. Wireless DMX via CRMX and W-DMX
-
- Control from Tx hard line DMX from Lighting Console
- Control from Apollo Bridge/AKS/Satellite (3 different Icons) via Apple iPad over WiFi
- Control from Tx hard line DMX from Lighting Console
Bluetooth
3. Bluetooth
-
- Bluetooth Direct Control From iOS device to Lamp via Blackout and Luminair
b. Blackout and Luminair Bluetooth to MoonLite to CRMX Control of lamps
WiFi
4. WiFi
-
- Connect the lamp to a Wireless Access Point to control with Art-Net over Wifi with Console or iOS
Wired
5. Wired
-
- Hard line DMX Cable from Lighting Console to multiple lamps
Art-Net
6. Art-Net (Unicast preferred)
-
- Hard line Cat6 from Lighting Console to RR/R2
- Hard line Cat6 from Lighting Console to RR throughput to multiple RRs
- Hard line Cat6 from Lighting Console to RR/R2
sACN
7.sACN
-
- Hard line Cat6 from Lighting Console to RR/R2
- Hard line Cat6 from Lighting Console to RR throughput to multiple RRs
- Hard line Cat6 from Lighting Console to RR/R2
Node Mode
8. Node Mode
-
- Art-Net or sACN hard line Cat6 from Lighting network to RR/R2 to DMX data out.
***Art-Net currently supports the node fixture outputing a different universe within a 14 universe range based on the universe of the node fixture, sACN supports outputting the same universe as the node fixture.
- Art-Net or sACN hard line Cat6 from Lighting network to RR/R2 to DMX data out.
Lead / Follow
9. Lead/Follow
-
- Lead lamp to wired Followers
b. Lead lamp to wireless Followers via CRMX