Wireless Control: Bluetooth

How To Connect over Bluetooth

Display BluetoothThe RR and R2 lights can be controlled over Bluetooth using the CRMX Lumen Radio chip with Blackout Lighting Console or Luminair app for iOS. Fixture labels will appear in the Bluetooth connections menu of the various apps used to control the fixtures (requires CRMX firmware v1.0.5 or later).

When Wireless Mode is set to Bluetooth, “BT” will appear in the bottom left corner.

When connected over Bluetooth, the Wireless Status Light and Data Status Light will be set to Blue. The Screen will show the Bluetooth Strength, along with the DMX Start Address.

Blue_BlueBluetooth Mode
Data: Blue / Wireless: Blue

Bluetooth connection can be reset by pressing and holding the Wireless Icon for 3 seconds

The CRMX Bluetooth module is part of the same TimoTwo chip as the Wireless DMX and can be updated with USB or with the CRMX Toolbox App.