Each RR and R2 is equipped with a Lumen Radio Timo chip for wireless connectivity over CRMX or W-DMX.
For wireless operation, go to Config->Wireless ON
or Double Press the Link button
Wireless Pairing
To link an RR or R2 light to a transmitter,
Go to Config->Wireless Settings, set the Wireless Mode to “Wireless DMX”
Go to Config->Status Lights and set to “ON”
If the Link LED is flashing, press and hold the Link 
button to unpair.
On the DMX Transmitter, tap the Link button to Pair.
The Wireless LED will start to flash and turn solid once paired.