When Unicasting to your fixtures, each fixture needs a unique IP address on the network. IP Presets can help speed up IP address entry for your RR and R2 lights
Network Presets can make configuring multiple fixtures easier and faster
This feature is part of the Firmware 0.7v release. If using an earlier firmware, you can update here.
- Config Menu->Ethernet Settings->IP Addr Mode->Static
- Set IP Addr->
- Edit IP Addr-> Pressing
will place the cursor on the first octet of the IP address. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the IP address
- IP Presets-> Choose from the most common IP address schemes Pressing enter will place the cursor on the fourth octet of the IP address. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the IP address.
- Edit IP Addr-> Pressing
- Set Subnet Mask->
- Edit SN Mask-> Pressing
will place the cursor on the first octet of the Subnet Mask. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the Subnet Mask.
- SN Presets-> Choose from the most common Subnet Mask schemes Pressing enter will place the cursor on the fourth octet of the Subnet Mask. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the Subnet Mask.
- Edit SN Mask-> Pressing
- Set Gateway->
- Edit Gateway-> Pressing
will place the cursor on the first octet of the Gateway address. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the Gateway.
- GW Presets-> Choose from the most common Gateway schemes. Pressing enter will place the cursor on the fourth octet of the Gateway address. Use the
Increase and decrease the address. Press the
to cycle to the next octet. Press and hold the
to store the Gateway address.
- Edit Gateway-> Pressing
In DHCP mode, the DHCP server on the network handles all of the IP Address assignment.