Skip to main content

Quasar Science - Help Center

About Updating TimoTwo Firmware

Check to see what version of the TimoTwo Firmware you have installed on your light.

  1. Double Tap the Power button to return to the Main Screen.

  2. Single Tap the Power button (3) times to get to the Firmware Status Screen.

  3. This will display the TimoTwo Version


There are two options for updating the TimoTwo chip.

  1. If you have TimoTwo version or later, the firmware can be updated using a USB drive. See Instructions Here

  2. If you have a version prior to, the TimoTwo firmware can only be updated with the CRMX Toolbox app over Bluetooth. See Instructions Here


The starCTRL App from Quasar Science requires TimoTwo v1.0.6.3 or later.

If updating over USB the .cci file is only seen when the fixture is in Manual Mode. Do not try and update TimoTwo when DMX input is active.