Manual Mode

Quasar Science - Help Center

When Looking at the Main Status Screen, press the to advance to the Parameters

Press or until desired function is shown on screen, and press to select.
The selection carets “> <” will move from the “> Function <” to the “> Value <”.
Press or to set the value. Press to save.
The selection carets “> <” will move from the “> Value <” back to the “> Function <”.
For function items that have a submenu(s), selection asterisks “* *” will show instead of carets. Press to enter and navigate functions in the submenu.

> Intensity < - Adjust the fixture's light output from 0 to 100%
> Color Temperature < - Adjust the white point’s Correlated Color Temperature (CCT) in increments from 1750 Kelvin - 10000 Kelvin. [See *Color Calibration Data]
> +/- Green < - Adjust the white point’s Tint (duv) in 1% increments from Full Minus Green(-100G) to Full Plus Green(100G). The default value is 0 Tint.
> Saturation < - 0 to 100% of transition between user-input white point and user-input Hue angle—by 1% increments
> Hue < - 0° to 360° by 1° increments
> CT Preset < - Color Temperature Presets – Automatically changes the Color temperature to desired setting and sets the saturation at 0%
- 2000K
- 2500K
- 3000K
- 3200K (Menu loads here)
- 4300K
- 5000K (CIE D50)
- 5600K (CIE D5600)
- 6500K (CIE D65)
- 10000K
> Color Preset < - Hue Color Presets – Automatically changes the Hue to desired color and sets the saturation at 100%
0°
Red
30°
Orange
60°
Yellow
120°
Green
180°
Cyan
240°
Blue
270°
Violet
300°
Magenta
> Effects < - Also available in +FX DMX Profiles
- Rainbow
- Short Circuit
- Paparazzi
- Strobe
- Fire
- Emergency Light
- Demo

Table 1. Config Menu Items

In this section:

Was this helpful?

Quasar Science - Help Center