Skip to main content

Quasar Science - Help Center

Fixture Numbers

Display Fixture Numbers as defined by the user of your RR and R2s

With Firmware 0.7b or later you may enable the display of fixture numbers on the LCD screen:

  1. Go to >Config Menu< use the Rainbow-Buttons__Minus.svg and Rainbow-Buttons__Plus.svg to navigate >Fixture#< and press ✓

  2. First, Enable the light to display the Fixture Number Display. On/Off

  3. Next, Press the Rainbow-Buttons__Minus.svg and Rainbow-Buttons__Plus.svg to advance to the next screen to set the fixture number. Quasar Science fixtures currently support up to 9999.99 discrete fixture numbers

  4. To View the fixture number set, from the Main Screen tap the power button multiple times. The fixture number will display after the Firmware Status Screen.

Holding the Rainbow-Buttons__Plus.svg and pressing the Rainbow-Buttons__Minus.svg will increase the fixture number by 1000

Holding the Rainbow-Buttons__Minus.svg and pressing the Rainbow-Buttons__Plus.svg will decrease the fixture number by 1000

If fixture numbers are enabled in the Config Menu, the LCD display will show the fixture number for 10 minutes before turning off.

Press any button on the fixture to reactivate the fixture number display.

9999_99.svg

The fixture number will display as large as possible depending on the number of characters used

This feature was part of the Firmware 0.7b release. If using an earlier firmware you can Update here Updating RR & R2 Firmware

In this section: